Application Analysis

The core of our LCD benchmarking comes from real application analysis. We play with a lot of monitors and it gets easier for us each time to pick out problems with an LCD just by using the right application. Here are a few quick looks at some demanding full screen applications. We already ran ColorVision's OptiCal software, so all of our monitors are calibrated and adjusted to the same curves.

High Definition Video - We cheated a little bit on this portion of the analysis and handicapped all the monitors. None of these LCDs can display a true HD signal correctly without compressing pixels or cropping the image. Nevertheless, we set out to play a WMV9 1080i signal on our monitors with the interest in looking for color differences. Since our monitors have all been precalibrated, we expect the same image on each screen. Unfortunately, no amount of calibration can fix some things; we still noticed "off" reds on most of the monitors (including the Samsung 193P, the Sony, the Planar and the Dell). The BenQ, NuTech and ViewSonic occasionally managed to wash out blues a little too easily, and when looking in the right places, we could easily spot some of the differences between the 6-bit BenQ image.



Samsung 193P
Click to enlarge.


The Matrix Reload, The Matrix - We use the Matrix series to test full motion video on our LCDs. Since the Matrix isn't the best movie to test color reproduction, we typically only look for motion blur or other imperfections. As expected, we noticed no fatal flaws in any of the LCDs. Although, while running some of them side by side, it became readily apparent that some monitors put a slight hint of color on the application - noticeably, the NuTech and ViewSonic monitors had a slight bluish tint.



NuTech L921G
Click to enlarge.


WarHammer 40K, Dawn of War - When looking for a monitor's response time, we generally only consult first-person shooters for reference. However, those of you who have played a fast-paced game of Warcraft III or NeverWinter Nights will know that scrolling around for hours puts a severe tax on the monitor. Although we didn't notice any profound difference on the 16ms BenQ monitor, we could tell that the Sony and Planar had occasional difficulty in poorly lit areas of the game. For example, when scrolling around the last level of DOW where the majority of the level is gray ash and black soot, we would see the edge of the menu bar and status icons bleed into the ground.

Looking closer, we noticed some small differences with heavy weapons fire while scrolling on the BenQ FP931 and Samsung 193P. With enough patience, we can actually count the tracers shot over long distances, but when viewing the same scene on the Planar PE191M, the same task seems almost impossible. Attempting to do the same on the ViewSonic LCD proves futile sometimes, but not others.

Max Payne 2 - The extreme light and dark transitions in Max Payne still provide us with the sufficient criteria to benchmark transient response time; specifically, we can focus on the light and dark extremes. However, in all of the demos that we ran, we noticed virtually no difference from one monitor to another. The Samsung 193P looked a little more vibrant than its competitors, but the NuTech and ViewSonic models were displaying particularly brighter lights while maintaining the same dark hues as the SyncMaster 193P. Revisiting Max Payne with the Dell 2001FP was a little bit of a surprise. Even with the brightness set to its maximum, we were a little surprised at how much brighter the 19" LCDs were running.


Samsung 910V
Click to Enlarge


Halo, Unreal Tournament 2004 - Halo and UT2K4 have very similar results, but now, we are looking for fast motion and color correctness at the same time. Again, we noticed a slightly blue tint to the BenQ monitor even after it was corrected with OptiCal. All of the monitors had a tendency to wash out, particularly in bright areas, and part of that is because we are running all of our monitors at the highest brightness levels. Specifically, the BenQ and Samsung 910V would wash out especially in bright explosions (a well-placed Redeemer usually did the trick). On occasion, the Sony SDM-934 and the Planar PE191M would blur in heavy laser battles (4 or 5 shock rifle shots firing across the screen would usually leave a small trail).



ViewSonic Q190MB
Click to Enlarge.



BenQ P931
Click to enlarge.


Quantitative Analysis Subjective Analysis (continued)
Comments Locked

97 Comments

View All Comments

  • soki - Tuesday, November 30, 2004 - link

    We want to see some reviews of the new wave of 19'' LCDs. Like the sony HS-94P/B with x-black technology, viewsonic VP912b or some 10 bit eizo monitors.. When?
  • UlricT - Tuesday, November 30, 2004 - link

    umm... page #4
    "The time that it takes the LCD to go from black to white may be 15ms while the time that it takes the LCD to go from black back to white may be 10ms"

    could be kinda confusing for the noob there. You guys really need an editorial staff :D
  • screech - Tuesday, November 30, 2004 - link

    #4 true.....i have also heard that working at a CRT monitor for 8 or more hours a day doubles the chances of glaucoma.....so it might be safer going LCD (for the eyes)........anyway.....
  • Jeff7181 - Tuesday, November 30, 2004 - link

    Man... I guess ignorance is bliss... I'm perfectly happy with the image quality of my $80 17 inch CRT... I can't imagine paying over $500 for a monitor unless you're doing graphics work as a profession.
  • D0rkIRL - Tuesday, November 30, 2004 - link

    Why does the Dell 2001FP have a 25ms typical response time while on your older review you state it as having a 16ms typical response time?
    The pixel pitch changed from .255mm to .55mm.

    Any reason behind these?
  • skunkbuster - Tuesday, November 30, 2004 - link

    just out of curiosity, what happens to all these lcds after they are reviewed?
  • KingofFah - Tuesday, November 30, 2004 - link

    I think there have to be gamers here, and I do not think LCDs are there yet when it comes to refresh rates; it would have been nice to see the refresh rates on the monitors at 1024, 1280, and 1600.

    I still haven't found a monitor better than a high quality, high res trinitron.

Log in

Don't have an account? Sign up now