A New FX

The next new CPU introduction that we're here to evaluate is the Athlon 64 FX-62, a 2.8GHz dual-core FX part that's debuting exclusively on the Socket-AM2 platform. Given AMD's policy of only having one active FX part at a time (prior violations of this rule aside), the FX-62 is the only FX on the AM2 platform. The FX-60 still reigns supreme on the Socket-939 platform, and since the two platforms perform the same we can pretty much compare the FX-60 to the FX-62 directly without worrying about any motherboard/memory/chipset differences skewing the comparison. Of course no very-high-end CPU comparison is complete without Intel's latest Extreme Edition processor, which in this case is the Pentium Extreme Edition 965 we reviewed back in March.

3D Rendering - Cinebench 9.5

3D Rendering Performance - Cinebench 9.5

The beauty of the FX series of AMD processors is that its cache size doesn't vary like the rest of the Athlon 64 line, so the FX-62 has an undeniable performance advantage thanks to its 2.8GHz clock speed. The clock speed advantage is able to give it a pretty decent performance boost over the FX-60 here, as well as over the Pentium EE 965.

3D Rendering - 3dsmax 7

3dsmax 7 - SPECapc Benchmark

While we see a performance increase over the FX-60 in 3dsmax 7, it isn't enough to catch up to the performance of the Pentium EE 965. At 3.73GHz, the 965 is an extremely formidable competitor and very high performance CPU for 3dsmax rendering tasks.

Video Encoding - DivX 6.1.1 Pro

DivX 6.1.1 Pro with Xmpeg 5.0.3

Intel gets the slight nod in DivX encoding performance, with the FX-62 falling smack in the middle of the chart here between the 965 and the FX-60.

Video Encoding - Windows Media Encoder 9

Windows Media Encoder 9 - Advanced Profile

The situation doesn't really change with WME9; the FX-62 manages to come very close to the Extreme Edition 965's performance but falls a little short. The improvement over the FX-60 is quite noticeable here.

Video Encoding - Quicktime 7.0.4 (H.264)

H.264 Encoding with Quicktime Pro 7.0.3

Apple's Quicktime for Windows has never run well on Intel processors, and the FX-62 takes good advantage of that fact by putting the Extreme Edition 965 to shame in our H.264 encoding test. After looking at the 4000+ vs. 3800+ comparison on the previous page, it's nice to see a real tangible performance difference between two AMD CPUs.

MP3 Encoding - iTunes 6.0.1.4

MP3 Encoding with iTunes 6.0.1.3

While all three CPUs are very competitive in their MP3 encoding performance the Athlon 64 FX-62 is the clear winner here, finishing the encoding task 16% faster than the Pentium EE 965.

Gaming - Quake 4

Quake 4

At higher clock speeds the Athlon 64 FX-62 really separates itself from the Pentium EE 965, offering a very significant 21% performance advantage in Quake 4.

Gaming - F.E.A.R.

F.E.A.R.

The AMD gaming advantage continues in F.E.A.R., this time the FX-62 holds on to a solid 18% lead.

Gaming - Oblivion

Oblivion

The Pentium Extreme Edition 965 is utterly disappointing in Oblivion, as the FX-62 outperforms it by an incredible 38%. With a very CPU and GPU dependent game like Oblivion, you can't ignore these types of performance differences, especially if you plan on feeding a pair of high end GPUs in SLI or CrossFire.

Athlon 64 FX-62 Conclusion

The Athlon 64 FX-62 verdict is a lot easier than with the 4000+ since the performance advantage is clear thanks to a 1MB L2 cache per core and an increase in clock speed. We would still recommend the FX-62 over the Extreme Edition 965 for gamers, but as we've seen in the past there are some situations where being able to execute four simultaneous threads, as you can with the EE, has its benefits.

Given the incredible price premium you pay for the FX-62, we would still strongly recommend going with a lower clocked Athlon 64 X2 instead. You can always overclock to get close to FX-62 performance or, alternatively, you could stay at the lower clock speed and enjoy lower thermal output.

How Does the New 4000+ Stack Up? Athlon 64 X2 5000+: A Cheap FX or Overpriced 4800+?
Comments Locked

83 Comments

View All Comments

  • jmke - Wednesday, May 24, 2006 - link

    here ya go

    quote:

    Dual-Channel DDR2-800 on AMD Athlon 64 X2 "AM2" — the First Test Results of the New Integrated Memory Controller in RightMark Memory Analyzer


    http://www.digit-life.com/articles2/mainboard/ddr2...">http://www.digit-life.com/articles2/mainboard/ddr2...
  • Xenoid - Tuesday, May 23, 2006 - link

    Ok so AM2 is AMD's offering for 2/4 06.

    The article title mentions same performance, faster memory, lower power. Wouldn't faster memory (in this case, ddr2) net a higher performance than what we're seeing here? Why is AMD bothering with DDR2 if it's not a significant improvement? If the power usage is so low, does this mean we can overclock a lot easier? I never understood the huge deal behind power usage on a cpu.
  • coldpower27 - Wednesday, May 24, 2006 - link

    DDR production is slowing down, and DDR2 is continuing to mature, AMD does need to change to this memory type now, regardless if they like it or not.

    DDR2 also allows higher capacities, so you can probably reach 4x2Gb now as 2Gb modles are actually available on DDR2.

    Considering DDR2 biggest advanatge bandwidth, is what AMD doesn't really need more fo right now, performance improvements will be negligible.
  • Furen - Wednesday, May 24, 2006 - link

    Also, having all that extra bandwidth available allows AMD to throw quad-core on the same socket without much problem (maybe 1H07... whatever everyone says I doubt AMD will let Intel have the quad-core advantage for a year, I'd say we'll see very low volume quad-cores as close to Intel's Kentsfield/Cloverton as humanly possible). I know we've heard that AM3 is coming next year (from, who else?, The Inquirer) but considering that the DDR3 spec is not finalized quite yet and just how slowly AMD jumped into the DDR2 bandwagon I'd say we won't see it until 2008 at the earliest.
  • Axloth - Wednesday, May 24, 2006 - link

    I think there is also marketing side. There are lots of people "unaware" of ddr1-ddr2 comparison. And they probably think that ddr2 "must" be better than ddr1 because of that that "2". Like: ddr2 is upgrade or next generation of ddr1 so its gotta be much faster. Also, they might go for intel because intel uses ddr2 and amd only ddr1... And they think intel's better thanks to ddr2, disregarding cpu qualities of both amd and intel.
  • pzkfwg - Tuesday, May 23, 2006 - link

    If DDR2-800 barely beats DDR-400, I was wondering if the AM2 socket could actually be slower than 939 DDR-400 when using DDR2-667 !?! Knowing that a very large amount of people would buy cheaper AM2 system with DDR2-667, that would be ridiculous!
  • mino - Wednesday, May 24, 2006 - link

    YES and NO.

    Remember most people buy generic CL3 or CL2.5 DDR400. IMHO generic DDR2-666 should be ona par with that.
  • soydios - Tuesday, May 23, 2006 - link

    So, the X2 4200+ will not run the memory at full speed. How safe would it be to overclock from 200x11=2200MHz DDR2-733 (2200/6=366x2=733) to 219x11=2200MHz DDR2-803 (2409/6=401.5x2=803) using OCZ DDR2-800 RAM and an Asus Xpress3200 motherboard?
  • Furen - Wednesday, May 24, 2006 - link

    I'd say that you can very likely get away with that overclock with pretty much every 4200+ as long as the motherboard allows you to do it.
  • mino - Wednesday, May 24, 2006 - link

    Safe as safe. At least from the point it won't blow up :)

    As for stability it all depends on the motherboard.

Log in

Don't have an account? Sign up now