Conclusion

When we were looking at the Radeon HD 5800 series cards, writing a conclusion was rather easy for us. We didn’t need to talk about intangibles like Eyefinity or DirectX 11, because the 5800 series brought better performance at better prices for existing games. This made recommending the 5800 series a straightforward thing to do.

But we don’t have that luxury with the Radeon HD 5700 series. The value of the 5770 in particular is clearly not going to be in its performance. Compared to AMD’s 4870, it loses well more than it wins, and if we throw out Far Cry 2, it’s around 10% slower overall. It also spends most of its time losing to NVIDIA’s GTX 260, which unfortunately the 4870 didn’t have so much trouble with. AMD clearly has put themselves in to a hole with memory bandwidth, and the 5770 doesn’t have enough of it to reach the performance it needs to be at.

If you value solely performance in today’s games, we can’t recommend the 5770. Either the 4870 1GB or the GTX 260 would be the better buy.

But don’t mistake that for a wholesale write-off of the 5770. As a 40nm product it’s cooler running and quieter than a 4870 or a GTX 260. As a DirectX 11 product it has longer legs to run on for future games and/or applications using DirectCompute 5.0. Eyefinity is also there, but with the performance of the card, (not to mention the cost of more monitors) it’s not something we’d seriously expect to see used on a 5770.

Our jobs would be made much easier if AMD had either made the 5770 perform at parity with the 4870, or made the 5770 cheaper. Right now on a good deal we can swing a 4870 for $140, while the 5770 will be sticking to $160. That’s 14% more for a card that performs 10% worse. If we take a linear extrapolation, the 5770 needs to be at around $130 to win on performance alone, or at the very least $140 so that we can talk solely about the 10% performance loss versus the extra functionality of the 5770.

AMD believes that DirectX 11 is the key to the success of the Radeon 5700 series, and in a way they’re right. If DirectX 11 takes off quickly, then buying a 5770 over a 4870 or GTX 260 right now would be a wise buy. But that’s a future that’s hard to predict, and something we got burnt on somewhat with DX10 and DX10.1.

So here’s the bottom line for the 5770: Unless you absolutely need to take advantage of the lower power requirements of the 40nm process (e.g. you pay a ton for power) or you strongly believe that DirectX 11 will have a developer adoption rate faster than anything we’ve seen before for DirectX, the 1GB 4870 or GTX 260 is still the way to go. Or to put things another way, outside of those two circumstances we’re still at status quo. A 1GB 4870 will continue to be a better choice until the price difference between one of those on sale and a 5770 drops below $10-$15, at which point we could justify rolling the dice and paying a bit more for the 5770. AMD is their own enemy here, which means we aren’t going to be very surprised if we see the 4870 go away very quickly once the 5770 is plentiful.

There is a brighter side today, and that’s the 5750. It wins as much as it loses, and overall it’s just as good as the 4850 when it comes to performance. The pricing is no different either, which means you’re paying the same amount of money for a card of similar performance, better features, and better power characteristics. It’s a no-brainer. Along the same lines the GTS 250 and the 5750 end up going back and forth enough that there’s no consistent performance difference. We’ll take DirectX 11 and 40nm over PhysX and CUDA any day of the week, so the GTS 250 becomes the next Evergreen victim. NVIDIA would need to shave the price down to justify its purchase once more (something they have not done on the GTX series in response to the 5870 and 5850).

The 5750 also whets our appetite for a great HTPC card with its excellent power characteristics and bitstreaming audio support. However it’s at risk of being overkill for that market with its performance and still too-great thermals for a market that, seeing as how the HTPC doesn’t need great performance and always could use lower thermals. A passively cooled 5750 in particular would make a good HTPC card, but we’d look at the Radeon HD 5600 series next year for our perfect HTPC card. If you can wait that long.

With the launch of the 5700 series, AMD finally gets to take a breather. 2 of their 4 Evergreen chips have launched, and nothing else is scheduled in the near future. Look for the release of the X2 series (Hemlock) late this year, and then next year the final 2 Evergreen chips will drop. But for now half of the job is done, with AMD having pushed out DX11 parts to $110 and above in the very short span of 3 weeks. It’s a pace that makes the slow proliferation of DX10 parts absolutely glacial in comparison.

Power, Temperature, & Noise
Comments Locked

117 Comments

View All Comments

  • endlesszeal - Tuesday, October 13, 2009 - link

    sorry, if this seems newbest since im still using DVI. anyway, i did a quick peak at apples site and only saw minidp to dvi dongle. however, i jumped over to monoprice and found this:

    http://www.monoprice.com/products/product.asp?c_id...">http://www.monoprice.com/products/produ...1&p_...

    would that work?
  • Xajel - Tuesday, October 13, 2009 - link

    Nope this wont work, the card(s) has only two TMDS's for one DVI and one DVI or HDMI, you can't use two DVI's + HDMI...

    if you want to connect the third monitor you have to use Display Port, and adapters won't work since DP on this card doesn't support DVI single Pass through ( this will need a seperated TMDS chip )

    there's some devices that support DVI/HDMI pass throught using DisplayPort, I'm talking about Apple latest Mac's where they dropped DVI/HDMI and replaced it with DP... that one supports DVI/HDMI adapters as it has it's own TMDS chip which is required for DVI/HDMI signals...
  • elfick - Tuesday, October 13, 2009 - link

    Monitors with HDMI seem fairly common and DP-HDMI adapters appear to be cheap. Could you do DP-HDMI, HDMI, and DVI for a triple monitor setup?
  • Ryan Smith - Tuesday, October 13, 2009 - link

    DP-HDMI is still a passive converter, so it still won't work.
  • Ryan Smith - Tuesday, October 13, 2009 - link

    No, it has to be an active (powered) adapter. You can tell if one is active if it has a USB plug, since that's where they're drawing power from.
  • Minion4Hire - Tuesday, October 13, 2009 - link

    It has to be powered if you wish to run dual-link DVI. The single-link MonoPrice adapter will work fine for resolutions up to 1920x1200. But most people looking to run Eyefinity will probably be wanting to go whole-hog with 2560x1600 given the large price tag already associated with such a setup.
  • kzig - Thursday, October 29, 2009 - link

    If I want to run 3 1280 x 1024 monitors together as 3840 x 1024 in Eyefinity, will I need an active adapter, or can I use a cheaper passive one?
  • BladeVenom - Tuesday, October 13, 2009 - link

    The Apple one is poorly rated. Dell has one, but it to is $100. And just to rerepeat that, it has to be an active adapter. http://accessories.us.dell.com/sna/products/Cables...">http://accessories.us.dell.com/sna/prod...us&l...
  • Ryan Smith - Tuesday, October 13, 2009 - link

    I was going to respond to this, but Xajel took the words out of my mouth. Just read his post, it explains why an active adapter is required.
  • bijeshn - Tuesday, October 13, 2009 - link

    Phasing out the 4870 is a bad idea. With time I look forward to the 4870 dropping even lower in price...

Log in

Don't have an account? Sign up now