Fall 2004 DVDR Roundup: Dual Layer and 16X DVD+R
by Anand Shimpi & Virginia Lee on November 1, 2004 12:05 AM EST- Posted in
- Storage
Write Tests (cont'd)
The DVR-108D, ND-3500A, and the GSA-4160B couldn't make it to the 8x mark as did most of the other drives. Though Ritek is one of the higher quality media like MCC, those drives still had some trouble working at the media's rated write speeds. The DDW-163 performed the best with the R03 media at 10.20X speeds while BenQ's DW1620 could not write to the disc at all.
Sony's DRU-710A and BenQ's DW1620 were the only drives capable of writing to MCC 004 media at 16x speeds using the CAV write method. All other drives were either not capable of handling this media at the full 16x speed or choked on it from the beginning. The GSA-4160B made it to 14X but couldn't hold it until the end of the write and the 108D topped out at 12X with its Z-CLV method of writing.
With the 16x Ritek media Nu Tech's DDW-163 was the only drive that would cooperate and push the speeds to 16x. All other drives either burned the 16x media at 4X or could not write to it at all. Ritek is not the largest MID available, but we were a little surprised to see so few burners actually capable of proper write descriptors. New firmware revisions will fix this issue in our other burners, but for the time being we were slightly dissapointed.
The only drives that burned coasters with dual layer media were Sony's DRU-710A and MSI's DR16-B. The rest all burned the dual layer media at around 2.4X while the DVR-108D and ND-3500A burned at about 4X speeds.
Facebook
Twitter
RSS
65 Comments
View All Comments
kellvarsen - Friday, November 26, 2004 - link
I would like to congrtulate the Anandtech team for this DVD-RW roundup as they prooved once more that they are better and more thorough with the testing than Tomshardware.And by this i am reffering to the writing quality test mainly ,which in my opinion is the most important and eloquent of them all.Great HL2 review also!!!Tabajara - Tuesday, November 16, 2004 - link
I've heard several people say that the new Plextor 716A drives are defective, and are mostly burning DVD coasters, specially dual layer ones. Pioneer Europe isn't selling them yet, and this also point to some kind of manufacturing problem. I was waiting for this drive, but now I don't know if I will buy a NEC or a Pioneer one. I would buy the DVR-108 if a new firmware version enables the user the choose the booktype to be used.JaRb0y - Thursday, November 4, 2004 - link
Curious, did you get the NEC 3500AG to write Fujifilm 48X CDR media at 48X? It appears you did, but I heard NEC limited the speed on some types. My drive does 32X on the Fujifilm TY, am I missing something?DonB - Thursday, November 4, 2004 - link
"ND-3500A is priced $10 lower than Pioneer's DVR-108D at $68" Prices are really coming down. I bought the same NEC 3500A just a few months ago for $95 + shipping (from NewEgg).eleewhm - Wednesday, November 3, 2004 - link
you guys sure know how to review dvd writers???looks like you are good at opening up the drives only
Since when does NEC 3500 overdrive MCC003?????? 6:72??...it only writes @8x speeds....
pls relook at the way you guys post the results...and understand nero numbers before publishing the article...
see how ppl are thrashing you guys here in singapore...we have a bunch of serious ppl here doing testing ...
http://forums.hardwarezone.com/showthread.php?p=11...
Maverick215 - Wednesday, November 3, 2004 - link
>NEC follows a pattern for each firmware revision: 2.xy, where:
>
>X = Type (Retail, OEM, Rebadge)
>Y = Revision number
>
>Till today know patterns:
>
>X = 0 (OEM)
>X = 1 (Retail)
>X = 2 (I-O Data)
>X = 4 (Freecom)
>X = 7 (TDK)
>X = B (Ricoh)
>X = F (MadDog)
>----------------------
>Y = 6
>Y = 7
>Y = 8
So what 2.26 really represents is the same generation of firmware with feature tweaks from an oem that rebadged the drive. The firmware wasn't released for the "retail" drive. We must distinguish OEM from rebadge now. OEM in the more "traditional" is a drive intended for resale, such as in a system(this is what you'll find at newegg and similar being sold as NEC). OEM rebadge would be a drive intended to be sold by another company with that company's logo etc if they desire, the insides of all these drives could very well be exactly the same, and often times are, since this saves the OEM a great deal of money. At most you'll get different revisions of the same line. (On the flip side you'll see companies such as HP that buy 16x drives from whoever is the cheapest, so Lite-On one month and BenQ the next)
--
NEC does have more support than just the "official" there are several "hacked" firmwares
that provide all kinds of features not in the official releases(bitsetting included), though I think they go beyond the scope of what you were trying to portray.
--
So, more fairly you would represent that the drive being OEM(system) might come with a 2.x7 firmware most likely 2.17(see above). An important distinction. Since this would seem to give this drive the same flaw as the pioneer (bitsetting only in DL) that disqualified itfrom winning..
But, I still don't need dvd-ram :)
Picking and chosing features from untested firmware and not doing the same from another drive has introduced a clear bias(bias in a scientific sense, which is information/data which skews the results of your study/review due to a sytematic error in your study/review design; I am NOT implying you have a bias to one product or another) in the selection of the winner.
==
as an aside, further confirmation that my assumption about the nutech drives is correct
email correspondence with Chris Geerlings,
Field Application Engineer from nutech I inquired to using any of the firmwares from the benq ftp. And he wrote back:
"I know the (G7)K9 works, the others I haven't tested yet."
asteamerandy - Tuesday, November 2, 2004 - link
In you review:"If LG had implemented bitsetting into their GSA-4160B, it would have helped their product climb the ladder ..."
"The booktype setting feature offered in this unit also makes this a great drive. The GSA-4160B is a bit on the steep side ..."
There are other instances if this abuigity. So which is it? Does the 4160B have the bit setting feature or not?
rcabor - Tuesday, November 2, 2004 - link
Why do you say "DVDR burn speeds are excellent, and the drive technically supports 4X DVD+DL burn speeds, even though it does not readily advertise such. You can see our original DL tests on the drive here." But then right below that you show an image of the box that Advertises 4x DVD+R dual layer?rcabor - Tuesday, November 2, 2004 - link
Maverick215 - Tuesday, November 2, 2004 - link
Still not working, short story=NEC 2.26=2.16 with tweaks to rebadge specifications. they do not follow traditional revision codes 2.x6=are all same