Understanding the Cell Microprocessor
by Anand Lal Shimpi on March 17, 2005 12:05 AM EST- Posted in
- CPUs
Ordering Instructions around Dependencies
Luckily, there are solutions to the problem of dependencies in code; one tackles the problem in hardware, the other tackles the problem in software.The software compiler is responsible for producing the assembly code that is sent to the CPU for execution. Thus, with an intimate knowledge of the inner workings of the CPU, the compiler can, generally speaking, produce code that minimizes data dependencies.
There are microprocessor architectures that are dependent entirely on the compiler to extract parallelism, on the instruction level, while avoiding dependencies as much as possible. These architectures are known as in-order microprocessors.
In-Order Architectures
As the name implies, an in-order microprocessor can only execute instructions in the order that they are sent to the CPU. At best, the CPU can execute multiple instructions in parallel, but it has no ability to reorder the instructions to suit its needs better.If you have a good enough compiler, then an in-order microprocessor should be just fine. There are a couple of key limitations, however:
1. Binaries Compiled for in-order architectures are very architecture specific
Although both the Athlon 64 and the Pentium 4 are fully able to run x86 code, they contain vastly different microarchitectures, with different execution units and very different things that they are “good” at. If both of the aforementioned chips depended entirely on the compiler to extract parallelism and maximize performance, one would most definitely suffer. You could always have two versions of every program, but that tends to get large and messy - especially from an update/patches standpoint. The compiler has to be intimately aware of the architecture that it’s compiling for, which works in cases like a game console where you don’t have multiple vendors providing differently architected CPUs with a common ISA, yet not so well when you look at something like the desktop x86 market.
2. Unpredictable memory latencies
Cache is a good thing, most of the time. Cache on a microprocessor does its best to keep frequently used data at hand, so it can be made available to the CPU at very low latencies. The problem is that cache adds a level of unpredictability to how long it will take to get data from memory. A cache hit could mean that your data will be ready in 10 - 20 cycles. A cache miss could mean that it’ll be hundreds of cycles. With an in-order microprocessor, you can’t reorder instructions based on data availability, so if data isn’t available in cache and the CPU has to wait longer to pull it from main memory, the entire CPU has to sit and wait until that data is brought in from main memory. Even if other instructions could be executed, an in-order microprocessor has no logic to effectively handle the on-the-fly reordering of instructions to get around unpredictable memory latencies.
If you can find a way around the limitations of an in-order architecture, there are some very tangible benefits:
1. A much simplified microprocessor
Out-of-Order microprocessors have a significant amount of complexity added to them in order to deal with on-the-fly reordering of instructions. We will talk about them in greater detail in the next section. By moving this complexity to the software/compiler side, you greatly reduce the complexity of your microprocessor and save your transistor budget for other things that can yield better performance benefits. Less complexity also means less power consumed and heat dissipated.
2. Shorter pipeline
In order to deal with the reordering of instructions, generally speaking, a number of pipeline stages have to be added to the architecture, resulting in higher power consumption and demands for a more accurate branch predictor (thanks to an even higher branch prediction penalty). While the impact on pipeline depth isn’t as big of a deal for longer pipelined designs, for shorter designs, the increase can be 40% or more.
Historically, the idea of a simple in-order core has been one that’s been abandoned in favor of the obvious alternative: an out-of-order architecture.
Facebook
Twitter
RSS
70 Comments
View All Comments
PhilAnd - Wednesday, October 5, 2005 - link
Thank you SO MUCH!!! I've been looking for an explanation of the cell forever and this did it perfictly!! THANK YOU!!! YOU ARE GOD!!!philpoe - Sunday, July 31, 2005 - link
Under the high-level overview of the cell section, the PPE has 64KB L1 and 512KB L2 cache.On the other hand, under the on-die memory controller section, we see that the XDR memory gives bandwidth of 25.6GB/sec, and the integrated memory controller "significantly reduces memory latencies".
My question then is, what good is the L1 and L2 cache doing? Given the amount of real estate those transistors take up, isn't it more economical to use the system RAM exclusively? The L2 cache takes up about the same amount of space as an SPE, not that it would help but so much to put another one on the die, but what effect on performance would getting rid of the L2 or even L1 cache have on memory with such high bandwidth?
tipoo - Wednesday, December 2, 2015 - link
L1 and L2 latency isn't even approached by the fastest system RAM latencies, XDR included. Nanoseconds vs milliseconds.jiulemoigt - Saturday, March 26, 2005 - link
Oh #59 it's funnier than that the PPE does all the work the modern CPU does with logic, and the easy stuff is done by the extra procs... but that means the messy {think calc equations} can not be done by the extra proc so if your game requires more abstract equations vs simple math {the math understadning simple math} say AI vs drawing boxes adn cubes, your machine will be dependant of the smaller proc, and the pipeline length is a game of balence prediction vs speed meaning that if you can predict a full pipeline it is much faster if the pipe is longer the vs you miss with the prediction at some point in the pipe and everthing after that point is lost so the longer the pipe is after the miss is a loss. So a shorter pipe is not nessacry better as there are tasks the P4 excells at because it has the huge pipe and the longer the pipe the high you can scale the proc speed, which is why intel chose such a huge pipe knowing the misses would hurt but at the time people still wanted every mhz possible. AMD has a 14 stage pipe because they use decent prediction but better register use, as well as fast pathing, but the biggest reason x86 is fast is because as long as it works theres reams of code out there to reach the sun a new system will require human hours to clean up so that is can take all the short cuts that x86 already does. So if the dev's are laughing now it is becasue the know it going to be very unfriendly to code for and are frustrated that the hardware which has years of effort going into it's design is not being designed to be easier to code for and to do the hardwork for us instead of the doing all the easy work faster which doesn't help us and making the hardwork harder! and in some cases run slower because it was cheaper. I understand how much money M$ lost, which was passed on to nvidia, so for them they won't get away with that this time so they will have to make it cheaper this time around.AndyKH - Thursday, March 24, 2005 - link
#55Regarding the interview from GameSpot:
He (the guy who is very upset with having to program for in-order cores) states that code will run very crappy on these new cores. Well... I don't know exactly how many pipeline stages the new cores have, but they will without a doubt have a LOT less stages than modern out-of-order core. If you also spend a great amount of design effort to make sure the branch target is calculated very early in the pipeline and couple that with a high clock frequency, you might not even need to fetch your bag of kleenexes to dry your eyes.
Of course, I don't know how long the pipeline in a Cell PPE or in the Xenon's cores is, but everything points to a very short one. Also I don't know how early the branch target is calculated, but I bet it's pretty early.
As an end remark I might add that "computer engineers are not stupid people". In the interview, the guy make it sound like it will be impossible to run gameplay code on the new console CPUs..... I personally don't think that IBM and Sonys engineers will design a CPU with such a little amount of care.
Regards
Andreas
TheGee - Monday, March 21, 2005 - link
Transputer anyone? The computer on a chip that could be massively parralleled? Difficult to program but this cell is not such a great leap in ideas but with the corporate weight may succeed where others have failed and break the x86 limitations put on PCs. If the busses are big enough it would be nice to be able to plug in extra CPUs on a card or such like to upgrade or speed up a system without to much difficulty as long as the software is not CPU limited. But as before it's best not to hold your breath!Slaimus - Sunday, March 20, 2005 - link
PS1 was easy to program, so that took off. Sony made PS2 very hard to program if you want to use its vector units efficiently, but since the game developers are already on board, they had to live with it. And sony will dump the same heap onto developers again with the PS3.With this kind of complexity, I have a feeling that middleware companies will thrive. Game developers want to create content more than write assembly code, so a few middleware companies will probably supply the libraries while everyone else licenses them. Of course Microsoft has a head start since DirectX already exists and is included in the devkit, but then again, the xbox2 is not as massively parallel.
stephenbrooks - Sunday, March 20, 2005 - link
Ah sod multiple cores. I always preferred playing Tetris anyhow.knitecrow - Friday, March 18, 2005 - link
GAME DEVELOPER @ GDC RANT ON NEXT GEN CONSOLEShttp://www.gamespot.com/news/2005/03/18/news_61204...
All right, here we go. "How Sony and Microsoft are about to screw your game design." These are games in the good old days. We didn't exactly have the best physique, but we were at least a balanced individual, you walk out on the beach, and you were like, you know, pathetic. But you know, you looked like a normal person. These are games today. We've been working really hard--I mean, you can maybe make the argument that this is the game--these are games today. I gotta little more work on that left arm to do, it's going to be as big as our graphics arm soon. This is kind of lame. We really want to be this guy don't we?
Unknown Speaker: No!
[laughter]
Chris Hecker: OK, he was the best guy I could find in like, three seconds in the WiFi network out in the lobby. All right. But how do we get there? Well, I'm going to take a little diversion here. I'm a programmer, so, I have two technical slides, really one technical slide. And that's about it. All right, ready? So there are two kinds of code in a game basically. There's gameplay code and engine code. Engine code, like graphics and physics, takes really giant data structures of homogenous data. I mean, it's all the same, like a lot of vertices are all a big matrix, or whatever, but usually floating point data structures these days. And you have a single small, relatively small hour that grinds away on that. This code is like, wow, it has a lot of math in it, it has to be optimized for super scalar, blah, blah, blah. It's just not actually that hard to write, right? It's pretty well defined what this code does.
The second kind of code we have is AI and gameplay code. Lots of little exceptions. Even if you're doing a simulation-y kind of game, there's tons of tunable parameters, [it's got a lot of interactions], it's a mess. I mean, this code--you look at the gameplay code in the game, and it's crap. Compared to like, my elegant physics simulator or whatever. But this is a code that actually makes the game feel different. This is the kind of code we want to be easy to write and so we can do more experimental stuff. Here is the terrifying realization about the next generation of consoles. I'm about to break about a zillion NDAs, but I didn't sign any NDAs so that's totally cool!
I'm actually a pretty good programmer and mathematician but my real talent is getting people to tell me stuff that they're not supposed to tell me. There we go. Gameplay code will get slower and harder to write on the next generation of consoles. Why is this? Here's our technical slide. Modern CPUs, like the Intel Pentium 4, blah, blah, blah, Pentium [indiscernible] or laptop, whatever is in your desktop, and all the modern power PCs, use what's called 'out of order' execution. Basically, out of order execution is there to make really crappy code run fast.
So, they basically--when out of order execution came out on the P6, the Pentium 6 [indiscernible] the Pentium 5, the original Pentium and the one after that. The Pentium Pro I think they called it, it basically annoyed a whole bunch of low level ASCII coders, because now all of a sudden, like, the crappiest-ass C code, that like, Joe junior programmer could write, is running as fast as their Assembly, and there's nothing they can do about it. Because the CPU behind their back, is like, reordering that guy's crappy ass C code, to run really well and utilize all the parts of the processor. While this annoyed a whole bunch of people in Scandinavia, it actually…
[laughter]
And this is a great change in the bad old days of 'in order execution,' where you had to be an Assembly language wizard to actually get your CPU to do anything. You were always stalling in the cache, you needed to like--it was crazy. It was a lot of fun to write that code. It wasn't exactly the most productive way of doing experimental programming.
The Xenon and the cell are both in order chips. What does this mean? The reason they did this, is it's cheaper for them to do this. They can drop a lot of core--you know--one out of order core is about the size of three to four in order cores. So, they can make a lot of in order cores and drop them on a chip, and keep the power down, and sell it for cheap--what does this do to our code?
Well, it makes--it's totally fine for grinding like, symmetric algorithms out of floating point numbers, but for lots of 'if' statements in directions, it totally sucks. How do we quantify 'totally sucks?' "Rumors" which happen to be from people who are actually working on these chips, is that straight line gameplay code runs at 1/3 to 1/10 the speed at the same clock rate on an in order core as an out of order core.
This means that your new fancy 2 plus gigahertz CPU, and its Xenon, is going to run code as slow or slower than the 733 megahertz CPU in the Xbox 1. The PS3 will be even worse.
This sucks!
[laughter]
There's absolutely nothing you can do about this. Well, you can actually hope that Nintendo uses an out of order core, because they're claiming that they're going to try and make it easy to develop for--except for Nintendo basically totally flailed this generation. So maybe they'll do something next generation. Who knows? You can think about having batchable design simulation-y systems, but like, I'm a huge proponent of simulation in gameplay, but even simulation in gameplay takes kind of messy systems under the hood. And this makes your gameplay harder to write.
You want to just write the gameplay. You don't want to have to like, spend 6 years of a super hardcore engine programmer's time to figure out how to make your gameplay run super scalars. You could do PC games. They are still out of order cores, but a lot of people don't think that's an option nowadays.
tipoo - Thursday, December 3, 2015 - link
It's funny looking back, he wanted them to change the CPU from the Gamecube for the next generation...They ended up using an upclocked Gamecube CPU for the Wii, and a modified tri core version of it for the Wii U.